Digital Circuits
Telecom

Telecom Electronics Manufacturing in India

Digital Circuits is a telecom electronics manufacturer for OEMs that need equipment to run 24x7 at remote tower sites. We build tower power supplies, site controllers, RF and GSM boards, from prototype to volume, across three plants in India.

From PCB assembly to complete box build, wire harness and functional testing, one accountable partner takes your telecom product from Gerber to dispatch.

Send Gerber & BOM→
Telecom electronics manufacturing in India – Digital Circuits
Built for 24x7 uptimeOutdoor cabinets & tower shelters

Whether you make tower power systems, site controllers, radios or M2M modules, we build your design to the same controlled process on every batch, for equipment that cannot go down.

Years of EMS
35+
16949:2016 quality system
IATF
Plants in India
3
CPH capacity
1 MM+
What we build for telecom OEMs

Telecom PCB Assembly and Box Build Services

Six product families, built on our PCB assembly services lines as part of our electronics contract manufacturing in India.

  • 01

    Telecom Power Supplies and Rectifiers

    Power electronics that keep tower sites running through grid cuts and voltage swings.

    • SMPS, rectifier and DC-DC converter boards
    • -48V DC power systems and battery charge control
    • Mixed SMT and through-hole for high-current parts
  • 02

    Tower and Site Controllers

    Controllers that monitor and manage power, batteries, DG sets and alarms at the site.

    • Site monitoring and alarm boards
    • Power management and DG control electronics
    • Remote monitoring interfaces (RS-485, Modbus, SNMP-ready designs)
  • 03

    RF and Wireless Boards

    Assembly for transmitter, receiver and radio boards where layout and soldering affect signal quality.

    • RF transmitter assemblies
    • Fine-pitch and shielded-can placement
    • Controlled process for RF performance consistency
  • 04

    GSM, 4G and IoT Communication Modules

    Connectivity boards for M2M, remote monitoring and telemetry.

    • GSM/LTE modem PCBs
    • Telemetry and data logger boards
    • Antenna and SIM interface assembly
  • 05

    Network and Digital Infrastructure Electronics

    Boards for the equipment that carries and manages data traffic.

    • CPU and processor boards
    • Network interface and control boards
    • BGA and micro-BGA assembly
  • 06

    Box Build, Enclosures and Wire Harness

    Complete, tested units delivered ready for site deployment.

    • Box build and system integration
    • Wire harness and cable assemblies
    • In-house plastic injection moulding for enclosures
    Explore box build and wire harness→
Built by us

Real Telecom Boards, Built on Our Lines

These telecom and communication products are built at our plants for OEM customers.

View all products→
  • Telecom tower power supply unit manufactured by Digital Circuits in India01

    Telecom Tower PSU

    Power supply unit for telecom tower sites, built for continuous outdoor duty.

  • Telecom tower controller PCB assembly02

    Telecom Tower Controller

    Site controller for power, battery and alarm management at tower sites.

  • RF transmitter PCB assembly for telecom equipment03

    RF Transmitter

    RF transmitter assembly built under a controlled soldering process.

  • GSM PCB assembly for M2M and remote monitoring04

    GSM PCB

    GSM communication board for remote monitoring and M2M connectivity.

Telecom-grade partner

Why Telecom OEMs Choose Digital Circuits

The same process discipline behind our industrial automation electronics and EV charger and BMS manufacturing, applied to your telecom boards and units.

IATF 16949:2016 certificate – Digital Circuits

IATF 16949:2016Certified

Our IATF 16949:2016 quality system brings automotive-grade process control to telecom builds. That means documented processes, PFMEA and SPC on every product line, not only on automotive work.

View our certificates→
  1. 01

    35+ years of EMS

    Decades of building power and control electronics for OEMs that cannot afford field failures.

  2. 02

    Proven telecom builds

    Tower PSUs, site controllers, RF transmitters and GSM boards are already in production on our lines.

  3. 03

    Power electronics depth

    Experience with high-current, high-heat boards: SMPS, chargers, battery controllers and energy meters.

  4. 04

    High-mix, low-to-mid volume

    Built for telecom programmes with many variants, regional versions and steady repeat orders.

  5. 05

    Three plants in India

    Bangalore, Mysore and Baddi give capacity, backup and shorter delivery to sites across the country.

  6. 06

    Turnkey or consigned sourcing

    We buy genuine, traceable components, or build with parts you supply.

Built for 24x7 uptime

Built for 24x7 Uptime at Remote Tower Sites

Telecom electronics often sit in shelters and outdoor cabinets with heat, dust, humidity and unstable power. A failed board means a site visit and lost network time. We build every telecom product to cut that risk.

Telecom electronics manufacturing SMT line in Bangalore, India
What site electronics face
  • Heat
  • Dust
  • Humidity
  • Unstable power

Quality for Harsh Telecom Environments

  • Incoming inspection and traceability. Every component lot is checked and tracked to its source.

  • Automated optical inspection (AOI). Solder joints and placement are checked on every board.

  • In-circuit and functional testing. Each board is powered and tested against your test spec before dispatch.

  • Conformal coating. Protects boards from moisture, dust and corrosion at outdoor sites.

  • PFMEA, control plans, SPC and Poka-Yoke. Risks are planned out before production starts.

  • Full lot traceability. Any unit in the field can be traced back to its build lot and components.

Built for Long Product Lifecycles

Telecom equipment stays in the field for years. We manage component obsolescence, revision control and repeat builds, so the board you order in year eight matches the one you approved in year one.

Explore our quality system→
  1. 01

    Obsolescence management

    Component lifecycles tracked, approved alternates suggested early.

  2. 02

    Revision control

    Every build follows the approved BOM and drawing revision.

  3. 03

    Repeat builds

    Locked processes so every reorder matches your first approval.

Applications we serve

Telecom Applications We Manufacture For

  • Telecom tower power systems

    Rectifiers, PSUs and battery backup electronics

  • Site monitoring and control

    Tower controllers, alarm and access control units

  • Hybrid and solar-powered sites

    Charge controllers and power management for off-grid towers

  • Radio and RF equipment

    Transmitter, receiver and RF front-end boards

  • M2M and IoT connectivity

    GSM/LTE modules, telemetry units, data loggers

  • Fibre and broadband equipment

    Control and power boards for access network gear

  • Data centre and edge infrastructure

    Power distribution and monitoring electronics

  • Small cells and 5G site equipment

    Power and control boards for densified networks

Localisation

Make Your Telecom Electronics in India

India is pushing telecom OEMs to build more equipment locally. The first telecom PLI scheme (₹12,195 crore, launched 2021) closed in March 2026, and a second edition focused on local value addition is now being prepared. Telecom operators also prefer gear from trusted, domestic supply chains.

Manufacturing your telecom electronics with an Indian EMS partner gives you:

  1. 01

    Higher local content

    For operator tenders and future incentive schemes.

  2. 02

    Lower import risk

    From tariffs, shipping delays and supplier restrictions.

  3. 03

    A shorter supply chain

    Faster prototypes, repeat orders and field support.

Proud to manufacture in India under the Make in India initiative.

Telecom electronics manufacturing India – production line at Digital Circuits
Bangalore · Mysore · Baddi
Make in India
How it works

How to Outsource Telecom Electronics Manufacturing to India

From your first Gerber file to tested units at your site or warehouse, in six clear steps.

Start with step 01: Send Gerber & BOM→
  1. 01

    Share your files

    You

    Send Gerber, BOM, assembly drawings and test requirements.

  2. 02

    DFM review

    Our engineers

    Our engineers check manufacturability, component availability and test coverage.

  3. 03

    Itemised quotation

    Digital Circuits

    A clear quote with component, assembly and testing costs, and lead times.

  4. 04

    Prototype approval

    You approve

    We build a first batch for your validation and field trials.

  5. 05

    Volume production

    Digital Circuits

    Approved builds move to production with locked processes and traceability.

  6. 06

    Test, pack and deliver

    Delivered to you

    Functional testing, protective packing and dispatch to your site or warehouse.

FAQs

Telecom Electronics Manufacturing FAQs

What telecom OEMs ask us most about tower power, controllers, RF boards and quality.

01

What telecom electronics does Digital Circuits manufacture?

We manufacture telecom tower power supplies, site and tower controllers, RF transmitter boards, GSM and LTE communication PCBs, and CPU and network control boards. We also deliver complete box builds with enclosures and wire harnesses.

02

What is telecom PCB assembly?

Telecom PCB assembly is the process of mounting and soldering components onto circuit boards used in telecom equipment. These boards must work 24x7 in heat, dust and unstable power, so they need tight process control, inspection and functional testing.

03

Do you manufacture power supplies for telecom towers?

Yes. Telecom tower PSUs are among the products we already build. We handle SMPS, rectifier, DC-DC converter and battery charge control electronics for tower sites.

04

Can you build complete telecom units, or only PCBs?

Both. We offer PCB assembly alone, or full box build with enclosures, wire harnesses, system integration and functional testing, ready for site installation.

05

How do you protect boards used at outdoor tower sites?

We apply conformal coating to protect against moisture, dust and corrosion. Every board also goes through AOI and in-circuit or functional testing before dispatch.

06

Do you handle low-volume, high-mix telecom builds?

Yes. Our lines are set up for high-mix, low-to-mid volume production, which suits telecom programmes with many variants and regular repeat orders.

07

How do you manage component obsolescence for long-life telecom products?

We track component lifecycles, suggest approved alternates early and control every revision. This keeps your product buildable for ten years or more.

08

Can you source components for telecom builds?

Yes. We offer turnkey sourcing with genuine, traceable components, or consigned builds using parts you supply.

09

Do you work with overseas telecom OEMs?

Yes. We work with 38 clients across three continents and support overseas OEMs that want to manufacture telecom electronics in India.

Request a quote for telecom electronics manufacturing in India
Let's Talk

Build Your Telecom Electronics in India

Send us your Gerber, BOM and test requirements. Our engineering team will reply within one business day with a DFM review and quotation.

Make In India

We are part of the Make in India initiative of the Government of India and we are proud to work towards building an Atma Nirbhar Bharat. We harness the power of the Indian manufacturing ecosystem for our clients and offer them distinct competitive advantages to thrive in the global marketplace.